iPhone Email Set Up Instructions

Configure iPhone/iPad for CommuniKate mail.

You can use the exact same mail server settings for your DBIS address too!

1. Tap Settings


2. Tap Mail


3. Tap Accounts


4. Tap Add Account


5. Tap Other


6. Tap Add Mail Account


7. Fill in your account information. Address is your full e-mail address.


Tap Next at the top right, which will bring you to a screen where you need to enter additional information. You need to scroll it up and down to fill in all fields.

Make sure that type of account is selected as IMAP In the sections Incoming Mail Server and Outgoing Mail Server Host Name, enter mail.securekate.com For both incoming and outgoing mail servers use your full e-mail address for User Name. Also make sure you’ve entered the password for outgoing mail server - it’s the same as for incoming.




8. Tap Next to verify your account information. Be patient, this verification does take time!


9. Tap Save


If you cannot send mail, please check the following settings:

Press Settings Press Mail Press Accounts Press your CommuniKate E-mail address Press Account

Under Outgoing Mail Server
Press SMTP
Under Primary Server, press the server name
Next to Host Name enter mail.securekate.com
User Name is your full e-mail address, Password is your e-mail password
Change Use SSL to On
Authentication should be set to Password
Change Server Port to 465
Press Done
Press Account

Under Incoming Mail Server
Change Host Name to mail.securekate.com
User Name is your full e-mail address, Password is your e-mail password

Press Advanced
Under Incoming Settings, change Use SSL to On

Authentication should be set to Password
Press Account
Press Done